
hledger_journal(5)           hledger User Manuals           hledger_journal(5)



NAME
       Journal - hledger's default file format, representing a General Journal

DESCRIPTION
       hledger's usual data source is a plain  text  file  containing  journal
       entries  in  hledger  journal  format.  This file represents a standard
       accounting general journal.  I use file names ending in  .journal,  but
       that's not required.  The journal file contains a number of transaction
       entries, each describing a transfer of money (or any commodity) between
       two or more named accounts, in a simple format readable by both hledger
       and humans.

       hledger's journal format is a compatible subset,  mostly,  of  ledger's
       journal  format,  so  hledger  can  work with compatible ledger journal
       files as well.  It's safe, and encouraged,  to  run  both  hledger  and
       ledger on the same journal file, eg to validate the results you're get-
       ting.

       You can use hledger without learning any more about this file; just use
       the  add  or web commands to create and update it.  Many users, though,
       also edit the  journal  file  directly  with  a  text  editor,  perhaps
       assisted by the helper modes for emacs or vim.

       Here's an example:

              ; A sample journal file. This is a comment.

              2008/01/01 income               ; <- transaction's first line starts in column 0, contains date and description
                  assets:bank:checking  $1    ; <- posting lines start with whitespace, each contains an account name
                  income:salary        $-1    ;    followed by at least two spaces and an amount

              2008/06/01 gift
                  assets:bank:checking  $1    ; <- at least two postings in a transaction
                  income:gifts         $-1    ; <- their amounts must balance to 0

              2008/06/02 save
                  assets:bank:saving    $1
                  assets:bank:checking        ; <- one amount may be omitted; here $-1 is inferred

              2008/06/03 eat & shop           ; <- description can be anything
                  expenses:food         $1
                  expenses:supplies     $1    ; <- this transaction debits two expense accounts
                  assets:cash                 ; <- $-2 inferred

              2008/10/01 take a loan
                  assets:bank:checking  $1
                  liabilities:debts    $-1

              2008/12/31 * pay off            ; <- an optional * or ! after the date means "cleared" (or anything you want)
                  liabilities:debts     $1
                  assets:bank:checking

FILE FORMAT
   Transactions
       Transactions  are  movements  of  some  quantity of commodities between
       named accounts.  Each transaction is represented  by  a  journal  entry
       beginning  with a simple date in column 0.  This can be followed by any
       of the following, separated by spaces:

       o (optional) a status character (empty, !, or *)

       o (optional) a transaction code (any short number or text, enclosed  in
         parentheses)

       o (optional) a transaction description (any remaining text until end of
         line or a semicolon)

       o (optional) a transaction comment  (any  remaining  text  following  a
         semicolon until end of line)

       Then  comes zero or more (but usually at least 2) indented lines repre-
       senting...

   Postings
       A posting is an addition of some amount to, or removal of  some  amount
       from,  an account.  Each posting line begins with at least one space or
       tab (2 or 4 spaces is common), followed by:

       o (optional) a status character (empty, !, or *), followed by a space

       o (required) an account name (any text,  optionally  containing  single
         spaces, until end of line or a double space)

       o (optional) two or more spaces or tabs followed by an amount.

       Positive  amounts  are being added to the account, negative amounts are
       being removed.

       The amounts within a transaction must always sum up to zero.  As a con-
       venience,  one  amount  may be left blank; it will be inferred so as to
       balance the transaction.

       Be sure to note the unusual two-space delimiter  between  account  name
       and  amount.  This makes it easy to write account names containing spa-
       ces.  But if you accidentally leave only one space (or tab) before  the
       amount, the amount will be considered part of the account name.

   Dates
   Simple dates
       Within  a journal file, transaction dates use Y/M/D (or Y-M-D or Y.M.D)
       Leading zeros are optional.  The year may be omitted, in which case  it
       will  be  inferred  from  the  context  -  the current transaction, the
       default year set with a default year directive,  or  the  current  date
       when  the command is run.  Some examples: 2010/01/31, 1/31, 2010-01-31,
       2010.1.31.

   Secondary dates
       Real-life transactions sometimes involve more than one date  -  eg  the
       date you write a cheque, and the date it clears in your bank.  When you
       want to model this, eg for more  accurate  balances,  you  can  specify
       individual  posting dates, which I recommend.  Or, you can use the sec-
       ondary dates (aka auxiliary/effective  dates)  feature,  supported  for
       compatibility with Ledger.

       A secondary date can be written after the primary date, separated by an
       equals sign.  The primary date, on the left, is used  by  default;  the
       secondary  date,  on the right, is used when the --date2 flag is speci-
       fied (--aux-date or --effective also work).

       The meaning of secondary dates is up to you, but it's best to follow  a
       consistent  rule.   Eg  write  the bank's clearing date as primary, and
       when needed, the date the transaction was initiated as secondary.

       Here's an example.  Note that a secondary date will use the year of the
       primary date if unspecified.

              2010/2/23=2/19 movie ticket
                expenses:cinema                   $10
                assets:checking

              $ hledger register checking
              2010/02/23 movie ticket         assets:checking                $-10         $-10

              $ hledger register checking --date2
              2010/02/19 movie ticket         assets:checking                $-10         $-10

       Secondary  dates require some effort; you must use them consistently in
       your journal entries and remember whether to use or not use the --date2
       flag for your reports.  They are included in hledger for Ledger compat-
       ibility, but posting dates are  a  more  powerful  and  less  confusing
       alternative.

   Posting dates
       You  can  give  individual  postings a different date from their parent
       transaction, by adding a posting comment containing a tag  (see  below)
       like date:DATE.  This is probably the best way to control posting dates
       precisely.  Eg in  this  example  the  expense  should  appear  in  May
       reports,  and the deduction from checking should be reported on 6/1 for
       easy bank reconciliation:

              2015/5/30
                  expenses:food     $10   ; food purchased on saturday 5/30
                  assets:checking         ; bank cleared it on monday, date:6/1

              $ hledger -f t.j register food
              2015/05/30                      expenses:food                  $10           $10

              $ hledger -f t.j register checking
              2015/06/01                      assets:checking               $-10          $-10

       DATE should be a simple date; if the year is not specified it will  use
       the  year  of  the  transaction's date.  You can set the secondary date
       similarly, with date2:DATE2.  The date: or  date2:  tags  must  have  a
       valid  simple  date  value  if they are present, eg a date: tag with no
       value is not allowed.

       Ledger's earlier, more compact bracketed date syntax is also supported:
       [DATE],  [DATE=DATE2]  or  [=DATE2].  hledger will attempt to parse any
       square-bracketed sequence of the 0123456789/-.= characters in this way.
       With  this  syntax, DATE infers its year from the transaction and DATE2
       infers its year from DATE.

   Status
       Transactions, or individual postings within a transaction, can  have  a
       status  mark,  which  is  a  single  character  before  the transaction
       description or posting account name, separated  from  it  by  a  space,
       indicating one of three statuses:


       mark     status
       ------------------
                unmarked
       !        pending
       *        cleared

       When  reporting,  you  can  filter  by  status  with the -U/--unmarked,
       -P/--pending, and -C/--cleared flags; or  the  status:,  status:!,  and
       status:* queries; or the U, P, C keys in hledger-ui.

       Note,  in Ledger and in older versions of hledger, the "unmarked" state
       is called "uncleared".  As  of  hledger  1.3  we  have  renamed  it  to
       unmarked for clarity.

       To  replicate Ledger and old hledger's behaviour of also matching pend-
       ing, combine -U and -P.

       Status marks are optional, but can be helpful eg for  reconciling  with
       real-world accounts.  Some editor modes provide highlighting and short-
       cuts for working with status.  Eg in Emacs ledger-mode, you can  toggle
       transaction status with C-c C-e, or posting status with C-c C-c.

       What  "uncleared", "pending", and "cleared" actually mean is up to you.
       Here's one suggestion:


       status       meaning
       --------------------------------------------------------------------------
       uncleared    recorded but not yet reconciled; needs review
       pending      tentatively reconciled (if needed, eg during a big reconcil-
                    iation)
       cleared      complete, reconciled as far as possible, and considered cor-
                    rect

       With this scheme, you would use -PC to see the current balance at  your
       bank,  -U  to  see  things which will probably hit your bank soon (like
       uncashed checks), and no flags to see the most up-to-date state of your
       finances.

   Description
       A  transaction's description is the rest of the line following the date
       and status mark (or until a  comment  begins).   Sometimes  called  the
       "narration" in traditional bookkeeping, it can be used for whatever you
       wish, or left blank.  Transaction descriptions can be  queried,  unlike
       comments.

   Payee and note
       You  can  optionally  include  a | (pipe) character in a description to
       subdivide it into a payee/payer name on the left and  additional  notes
       on  the  right.   This may be worthwhile if you need to do more precise
       querying and pivoting by payee.

   Account names
       Account names typically have several parts separated by a  full  colon,
       from  which hledger derives a hierarchical chart of accounts.  They can
       be anything you like, but  in  finance  there  are  traditionally  five
       top-level  accounts: assets, liabilities, income, expenses, and equity.

       Account names may contain single  spaces,  eg:  assets:accounts receiv-
       able.   Because  of  this,  they must always be followed by two or more
       spaces (or newline).

       Account names can be aliased.

   Amounts
       After the account name, there is usually an amount.  Important: between
       account name and amount, there must be two or more spaces.

       Amounts  consist of a number and (usually) a currency symbol or commod-
       ity name.  Some examples:

       2.00001
       $1
       4000 AAPL
       3 "green apples"
       -$1,000,000.00
       INR 9,99,99,999.00
       EUR -2.000.000,00
       1 999 999.9455
       EUR 1E3
       1000E-6s

       As you can see, the amount format is somewhat flexible:

       o amounts are a number (the "quantity") and optionally a currency  sym-
         bol/commodity name (the "commodity").

       o the  commodity  is  a  symbol, word, or phrase, on the left or right,
         with or without a separating space.  If the commodity  contains  num-
         bers,  spaces  or  non-word punctuation it must be enclosed in double
         quotes.

       o negative amounts with a commodity on the left can have the minus sign
         before or after it

       o digit  groups  (thousands, or any other grouping) can be separated by
         space or comma or period and should be used as separator between  all
         groups

       o decimal  part  can be separated by comma or period and should be dif-
         ferent from digit groups separator

       o scientific E-notation is allowed.  Be careful  not  to  use  a  digit
         group  separator  character  in scientific notation, as it's not sup-
         ported and it might get mistaken for a decimal point.  (Declaring the
         digit group separator character explicitly with a commodity directive
         will prevent this.)

       You can use any of these  variations  when  recording  data.   However,
       there  is  some  ambiguous  way of representing numbers like $1.000 and
       $1,000 both may mean either one thousand or  one  dollar.   By  default
       hledger  will assume that this is sole delimiter is used only for deci-
       mals.  On the other hand commodity format declared prior to  that  line
       will help to resolve that ambiguity differently:

              commodity $1,000.00

              2017/12/25 New life of Scrooge
                  expenses:gifts  $1,000
                  assets

       Though  journal  may  contain  mixed  styles  to represent amount, when
       hledger displays amounts, it will choose a consistent format  for  each
       commodity.   (Except  for  price amounts, which are always formatted as
       written).  The display format is chosen as follows:

       o if there is a commodity directive specifying the format, that is used

       o otherwise  the  format  is  inferred from the first posting amount in
         that commodity in the journal, and the precision (number  of  decimal
         places) will be the maximum from all posting amounts in that commmod-
         ity

       o or if there are no such amounts in the journal, a default  format  is
         used (like $1000.00).

       Price  amounts  and amounts in D directives usually don't affect amount
       format inference, but in some situations they  can  do  so  indirectly.
       (Eg  when  D's default commodity is applied to a commodity-less amount,
       or when an amountless posting is balanced using a price's commodity, or
       when  -V  is  used.) If you find this causing problems, set the desired
       format with a commodity directive.

   Virtual Postings
       When you parenthesise the account name in a posting,  we  call  that  a
       virtual posting, which means:

       o it is ignored when checking that the transaction is balanced

       o it  is  excluded from reports when the --real/-R flag is used, or the
         real:1 query.

       You could use this, eg, to set an  account's  opening  balance  without
       needing to use the equity:opening balances account:

              1/1 special unbalanced posting to set initial balance
                (assets:checking)   $1000

       When the account name is bracketed, we call it a balanced virtual post-
       ing.  This is like an ordinary virtual posting except the balanced vir-
       tual  postings  in a transaction must balance to 0, like the real post-
       ings (but separately from them).  Balanced virtual  postings  are  also
       excluded by --real/-R or real:1.

              1/1 buy food with cash, and update some budget-tracking subaccounts elsewhere
                expenses:food                   $10
                assets:cash                    $-10
                [assets:checking:available]     $10
                [assets:checking:budget:food]  $-10

       Virtual postings have some legitimate uses, but those are few.  You can
       usually find an equivalent journal entry using real postings, which  is
       more correct and provides better error checking.

   Balance Assertions
       hledger  supports  Ledger-style  balance  assertions  in journal files.
       These look like =EXPECTEDBALANCE following a posting's amount.   Eg  in
       this  example we assert the expected dollar balance in accounts a and b
       after each posting:

              2013/1/1
                a   $1  =$1
                b       =$-1

              2013/1/2
                a   $1  =$2
                b  $-1  =$-2

       After reading a journal file, hledger will check all balance assertions
       and  report  an error if any of them fail.  Balance assertions can pro-
       tect you from, eg, inadvertently disrupting reconciled  balances  while
       cleaning  up  old  entries.   You can disable them temporarily with the
       --ignore-assertions flag, which can be useful  for  troubleshooting  or
       for reading Ledger files.

   Assertions and ordering
       hledger  sorts  an  account's postings and assertions first by date and
       then (for postings on the same day) by parse order.  Note this is  dif-
       ferent from Ledger, which sorts assertions only by parse order.  (Also,
       Ledger assertions do not see the accumulated effect of  repeated  post-
       ings to the same account within a transaction.)

       So,  hledger  balance  assertions  keep  working if you reorder differ-
       ently-dated transactions  within  the  journal.   But  if  you  reorder
       same-dated transactions or postings, assertions might break and require
       updating.  This order dependence does bring an advantage: precise  con-
       trol over the order of postings and assertions within a day, so you can
       assert intra-day balances.

   Assertions and included files
       With included files, things are a little more  complicated.   Including
       preserves  the ordering of postings and assertions.  If you have multi-
       ple postings to an account on the  same  day,  split  across  different
       files,  and  you  also want to assert the account's balance on the same
       day, you'll have to put the assertion in the right file.

   Assertions and multiple -f options
       Balance assertions don't work well across files specified with multiple
       -f options.  Use include or concatenate the files instead.

   Assertions and commodities
       The  asserted  balance must be a simple single-commodity amount, and in
       fact the assertion checks only  this  commodity's  balance  within  the
       (possibly  multi-commodity) account balance.  We could call this a par-
       tial balance assertion.  This is compatible with Ledger, and  makes  it
       possible to make assertions about accounts containing multiple commodi-
       ties.

       To assert each commodity's balance in such a  multi-commodity  account,
       you  can  add multiple postings (with amount 0 if necessary).  But note
       that no matter how many assertions you  add,  you  can't  be  sure  the
       account does not contain some unexpected commodity.  (We'll add support
       for this kind of total balance assertion if there's demand.)

   Assertions and subaccounts
       Balance assertions do not count  the  balance  from  subaccounts;  they
       check the posted account's exclusive balance.  For example:

              1/1
                checking:fund   1 = 1  ; post to this subaccount, its balance is now 1
                checking        1 = 1  ; post to the parent account, its exclusive balance is now 1
                equity

       The  balance  report's  flat  mode  shows these exclusive balances more
       clearly:

              $ hledger bal checking --flat
                                 1  checking
                                 1  checking:fund
              --------------------
                                 2

   Assertions and virtual postings
       Balance assertions are checked against all postings, both real and vir-
       tual.  They are not affected by the --real/-R flag or real: query.

   Balance Assignments
       Ledger-style  balance  assignments  are also supported.  These are like
       balance assertions, but with no posting amount on the left side of  the
       equals  sign;  instead  it is calculated automatically so as to satisfy
       the assertion.  This can be a convenience during data  entry,  eg  when
       setting opening balances:

              ; starting a new journal, set asset account balances
              2016/1/1 opening balances
                assets:checking            = $409.32
                assets:savings             = $735.24
                assets:cash                 = $42
                equity:opening balances

       or when adjusting a balance to reality:

              ; no cash left; update balance, record any untracked spending as a generic expense
              2016/1/15
                assets:cash    = $0
                expenses:misc

       The calculated amount depends on the account's balance in the commodity
       at that point (which depends on the previously-dated  postings  of  the
       commodity  to  that account since the last balance assertion or assign-
       ment).  Note that using balance assignments makes your journal a little
       less explicit; to know the exact amount posted, you have to run hledger
       or do the calculations yourself, instead of just reading it.

   Prices
   Transaction prices
       Within a transaction, you can note an amount's price in another commod-
       ity.   This can be used to document the cost (in a purchase) or selling
       price (in a sale).  For  example,  transaction  prices  are  useful  to
       record purchases of a foreign currency.

       Transaction  prices  are  fixed,  and do not change over time.  (Ledger
       users: Ledger uses a different syntax for fixed  prices,  {=UNITPRICE},
       which hledger currently ignores).

       There are several ways to record a transaction price:

       1. Write the price per unit, as @ UNITPRICE after the amount:

                  2009/1/1
                    assets:euros     100 @ $1.35  ; one hundred euros purchased at $1.35 each
                    assets:dollars                 ; balancing amount is -$135.00

       2. Write the total price, as @@ TOTALPRICE after the amount:

                  2009/1/1
                    assets:euros     100 @@ $135  ; one hundred euros purchased at $135 for the lot
                    assets:dollars

       3. Specify amounts for all postings, using exactly two commodities, and
          let hledger infer the price that balances the transaction:

                  2009/1/1
                    assets:euros     100          ; one hundred euros purchased
                    assets:dollars  $-135          ; for $135

       Amounts with transaction prices can be  displayed  in  the  transaction
       price's commodity by using the -B/--cost flag (except for #551) ("B" is
       from "cost Basis").  Eg for the above, here is how -B affects the  bal-
       ance report:

              $ hledger bal -N --flat
                             $-135  assets:dollars
                              100  assets:euros
              $ hledger bal -N --flat -B
                             $-135  assets:dollars
                              $135  assets:euros    # <- the euros' cost

       Note  -B is sensitive to the order of postings when a transaction price
       is inferred: the inferred price will be in the commodity  of  the  last
       amount.  So if example 3's postings are reversed, while the transaction
       is equivalent, -B shows something different:

              2009/1/1
                assets:dollars  $-135               ; 135 dollars sold
                assets:euros     100               ; for 100 euros

              $ hledger bal -N --flat -B
                             -100  assets:dollars  # <- the dollars' selling price
                              100  assets:euros

   Market prices
       Market prices are not tied to a particular transaction; they  represent
       historical  exchange rates between two commodities.  (Ledger calls them
       historical prices.) For  example,  the  prices  published  by  a  stock
       exchange  or the foreign exchange market.  hledger can use these prices
       to show the market value of things at a given date, see market value.

       To record market prices, use P directives in the main journal or in  an
       included file.  Their format is:

              P DATE COMMODITYBEINGPRICED UNITPRICE

       DATE  is a simple date as usual.  COMMODITYBEINGPRICED is the symbol of
       the commodity being priced.  UNITPRICE is an  ordinary  amount  (symbol
       and  quantity) in a second commodity, specifying the unit price or con-
       version rate for the first commodity in terms of  the  second,  on  the
       given date.

       For  example, the following directives say that one euro was worth 1.35
       US dollars during 2009, and $1.40 from 2010 onward:

              P 2009/1/1  $1.35
              P 2010/1/1  $1.40

   Comments
       Lines in the journal beginning with a semicolon (;) or hash (#) or star
       (*)  are  comments, and will be ignored.  (Star comments cause org-mode
       nodes to be ignored, allowing emacs users to fold  and  navigate  their
       journals with org-mode or orgstruct-mode.)

       Also,   anything  between  comment  and  end comment  directives  is  a
       (multi-line) comment.  If there is no end comment, the comment  extends
       to the end of the file.

       You  can  attach  comments  to  a transaction by writing them after the
       description and/or indented on the following lines  (before  the  post-
       ings).   Similarly, you can attach comments to an individual posting by
       writing them after the amount and/or indented on the  following  lines.
       Transaction and posting comments must begin with a semicolon (;).

       Some examples:

              # a file comment

              ; also a file comment

              comment
              This is a multiline file comment,
              which continues until a line
              where the "end comment" string
              appears on its own (or end of file).
              end comment

              2012/5/14 something  ; a transaction comment
                  ; the transaction comment, continued
                  posting1  1  ; a comment for posting 1
                  posting2
                  ; a comment for posting 2
                  ; another comment line for posting 2
              ; a file comment (because not indented)

   Tags
       Tags  are  a  way  to add extra labels or labelled data to postings and
       transactions, which you can then search or pivot on.

       A simple tag is a word (which may contain hyphens) followed by  a  full
       colon, written inside a transaction or posting comment line:

              2017/1/16 bought groceries    ; sometag:

       Tags  can  have  a  value, which is the text after the colon, up to the
       next comma or end of line, with leading/trailing whitespace removed:

                  expenses:food    $10   ; a-posting-tag: the tag value

       Note this means hledger's tag values can not  contain  commas  or  new-
       lines.  Ending at commas means you can write multiple short tags on one
       line, comma separated:

                  assets:checking       ; a comment containing tag1:, tag2: some value ...

       Here,

       o "a comment containing" is just comment text, not a tag

       o "tag1" is a tag with no value

       o "tag2" is another tag, whose value is "some value ..."

       Tags in a transaction comment affect the transaction  and  all  of  its
       postings,  while  tags  in  a posting comment affect only that posting.
       For example,  the  following  transaction  has  three  tags  (A,  TAG2,
       third-tag) and the posting has four (those plus posting-tag):

              1/1 a transaction  ; A:, TAG2:
                  ; third-tag: a third transaction tag, <- with a value
                  (a)  $1  ; posting-tag:

       Tags  are  like  Ledger's metadata feature, except hledger's tag values
       are simple strings.

   Directives
   Account aliases
       You can define aliases which rewrite your account names (after  reading
       the journal, before generating reports).  hledger's account aliases can
       be useful for:

       o expanding shorthand account names to their full form, allowing easier
         data entry and a less verbose journal

       o adapting old journals to your current chart of accounts

       o experimenting with new account organisations, like a new hierarchy or
         combining two accounts into one

       o customising reports

       See also Cookbook: rewrite account names.

   Basic aliases
       To set an account alias, use the alias directive in your journal  file.
       This  affects all subsequent journal entries in the current file or its
       included files.  The spaces around the = are optional:

              alias OLD = NEW

       Or, you can use the --alias 'OLD=NEW' option on the command line.  This
       affects all entries.  It's useful for trying out aliases interactively.

       OLD and NEW are full account names.  hledger will  replace  any  occur-
       rence  of  the old account name with the new one.  Subaccounts are also
       affected.  Eg:

              alias checking = assets:bank:wells fargo:checking
              # rewrites "checking" to "assets:bank:wells fargo:checking", or "checking:a" to "assets:bank:wells fargo:checking:a"

   Regex aliases
       There is also a more powerful variant that uses a  regular  expression,
       indicated by the forward slashes:

              alias /REGEX/ = REPLACEMENT

       or --alias '/REGEX/=REPLACEMENT'.

       REGEX  is  a  case-insensitive regular expression.  Anywhere it matches
       inside an account name, the matched part will be replaced  by  REPLACE-
       MENT.   If REGEX contains parenthesised match groups, these can be ref-
       erenced by the usual numeric backreferences in REPLACEMENT.  Eg:

              alias /^(.+):bank:([^:]+)(.*)/ = \1:\2 \3
              # rewrites "assets:bank:wells fargo:checking" to  "assets:wells fargo checking"

       Also note that REPLACEMENT continues to the end of line (or on  command
       line,  to  end  of  option argument), so it can contain trailing white-
       space.

   Multiple aliases
       You can define as many aliases as you like  using  directives  or  com-
       mand-line  options.  Aliases are recursive - each alias sees the result
       of applying previous ones.   (This  is  different  from  Ledger,  where
       aliases are non-recursive by default).  Aliases are applied in the fol-
       lowing order:

       1. alias directives, most recently seen first (recent  directives  take
          precedence over earlier ones; directives not yet seen are ignored)

       2. alias options, in the order they appear on the command line

   end aliases
       You   can  clear  (forget)  all  currently  defined  aliases  with  the
       end aliases directive:

              end aliases

   account directive
       The account directive predeclares account names.  The simplest form  is
       account ACCTNAME, eg:

              account assets:bank:checking

       Currently  this  mainly  helps  with  account name autocompletion in eg
       hledger add, hledger-iadd, hledger-web, and ledger-mode.
       In future it will also help detect misspelled accounts.

       Account names can be followed by a numeric account code:

              account assets                  1000
              account assets:bank:checking    1110
              account liabilities             2000
              account revenues                4000
              account expenses                6000

       This affects account display order in reports: accounts with codes  are
       listed  before accounts without codes, in increasing code order.  (Oth-
       erwise, accounts are listed alphabetically.) Account  codes  should  be
       all  numeric  digits, unique, and separated from the account name by at
       least two spaces (since account names may contain single  spaces).   By
       convention,  often the first digit indicates the type of account, as in
       this numbering scheme and the example above.  In future, we  might  use
       this to recognize account types.

       An account directive can also have indented subdirectives following it,
       which are currently ignored.  Here is the full syntax:

              ; account ACCTNAME  [OPTIONALCODE]
              ;   [OPTIONALSUBDIRECTIVES]

              account assets:bank:checking   1110
                a comment
                some-tag:12345

   apply account directive
       You can specify a  parent  account  which  will  be  prepended  to  all
       accounts  within  a  section of the journal.  Use the apply account and
       end apply account directives like so:

              apply account home

              2010/1/1
                  food    $10
                  cash

              end apply account

       which is equivalent to:

              2010/01/01
                  home:food           $10
                  home:cash          $-10

       If end apply account is omitted, the effect lasts to  the  end  of  the
       file.  Included files are also affected, eg:

              apply account business
              include biz.journal
              end apply account
              apply account personal
              include personal.journal

       Prior  to  hledger 1.0, legacy account and end spellings were also sup-
       ported.

   Multi-line comments
       A line containing just comment starts a multi-line comment, and a  line
       containing just end comment ends it.  See comments.

   commodity directive
       The  commodity directive predefines commodities (currently this is just
       informational), and also it may define the display format  for  amounts
       in this commodity (overriding the automatically inferred format).

       It may be written on a single line, like this:

              ; commodity EXAMPLEAMOUNT

              ; display AAAA amounts with the symbol on the right, space-separated,
              ; using period as decimal point, with four decimal places, and
              ; separating thousands with comma.
              commodity 1,000.0000 AAAA

       or  on  multiple  lines, using the "format" subdirective.  In this case
       the commodity symbol appears twice and  should  be  the  same  in  both
       places:

              ; commodity SYMBOL
              ;   format EXAMPLEAMOUNT

              ; display indian rupees with currency name on the left,
              ; thousands, lakhs and crores comma-separated,
              ; period as decimal point, and two decimal places.
              commodity INR
                format INR 9,99,99,999.00

   Default commodity
       The  D  directive  sets a default commodity (and display format), to be
       used for amounts without a commodity symbol (ie, plain numbers).  (Note
       this  differs from Ledger's default commodity directive.) The commodity
       and display format will be applied  to  all  subsequent  commodity-less
       amounts, or until the next D directive.

              # commodity-less amounts should be treated as dollars
              # (and displayed with symbol on the left, thousands separators and two decimal places)
              D $1,000.00

              1/1
                a     5    ; <- commodity-less amount, becomes $1
                b

   Default year
       You  can set a default year to be used for subsequent dates which don't
       specify a year.  This is a line beginning with Y followed by the  year.
       Eg:

              Y2009      ; set default year to 2009

              12/15      ; equivalent to 2009/12/15
                expenses  1
                assets

              Y2010      ; change default year to 2010

              2009/1/30  ; specifies the year, not affected
                expenses  1
                assets

              1/31       ; equivalent to 2010/1/31
                expenses  1
                assets

   Including other files
       You  can  pull in the content of additional journal files by writing an
       include directive, like this:

              include path/to/file.journal

       If the path does not begin with a slash, it is relative to the  current
       file.  Glob patterns (*) are not currently supported.

       The  include  directive  can  only  be  used  in journal files.  It can
       include journal, timeclock or timedot files, but not CSV files.

Periodic transactions
       Periodic transactions are a kind of rule with a dual purpose: they  can
       specify  recurring  future  transactions  (with  --forecast), or budget
       goals (with --budget).  They look a bit like a transaction, except  the
       first line is a tilde (~) followed by a period expression:

              ~ weekly
                assets:bank:checking   $400 ; paycheck
                income:acme inc

       With  --forecast,  each  periodic  transaction rule generates recurring
       "forecast" transactions at the specified interval,  beginning  the  day
       after  the  latest recorded journal transaction (or today, if there are
       no transactions) and ending 6 months from today (or at the  report  end
       date, if specified).

       With  balance --budget,  each  periodic  transaction declares recurring
       budget goals for the specified accounts.  Eg the example above declares
       the  goal  of receiving $400 from income:acme inc (and also, depositing
       $400 into assets:bank:checking) every week.

       For more details, see: balance: Budgeting and Budgeting  and  Forecast-
       ing.

Automated postings
       Automated  postings are postings added automatically by rule to certain
       transactions (with --auto).  An automated posting  rule  looks  like  a
       transaction  where  the  first  line is an equal sign (=) followed by a
       query:

              = expenses:gifts
                  budget:gifts  *-1
                  assets:budget  *1

       The posting amounts can be of the form *N, which means "the  amount  of
       the  matched  transaction's  first posting, multiplied by N".  They can
       also be ordinary fixed amounts.  Fixed amounts with no commodity symbol
       will  be  given  the  same commodity as the matched transaction's first
       posting.

       This example adds a corresponding (unbalanced) budget posting to  every
       transaction involving the expenses:gifts account:

              = expenses:gifts
                  (budget:gifts)  *-1

              2017-12-14
                expenses:gifts  $20
                assets

              $ hledger print --auto
              2017/12/14
                  expenses:gifts             $20
                  (budget:gifts)            $-20
                  assets

       Automated  postings  would not be distinguishable from equivalent post-
       ings written by hand.  In particular, they would affect [amount  infer-
       ence|#postings]  and  [balance assertion|#balance-assertions] checks in
       the usual way.

EDITOR SUPPORT
       Add-on modes exist for various text editors, to make working with jour-
       nal  files  easier.   They add colour, navigation aids and helpful com-
       mands.  For hledger users who  edit  the  journal  file  directly  (the
       majority), using one of these modes is quite recommended.

       These  were  written  with  Ledger  in mind, but also work with hledger
       files:


       Editor
       --------------------------------------------------------------------------
       Emacs          http://www.ledger-cli.org/3.0/doc/ledger-mode.html
       Vim            https://github.com/ledger/vim-ledger
       Sublime Text   https://github.com/ledger/ledger/wiki/Edit-
                      ing-Ledger-files-with-Sublime-Text-or-RubyMine
       Textmate       https://github.com/ledger/ledger/wiki/Using-TextMate-2
       Text   Wran-   https://github.com/ledger/ledger/wiki/Edit-
       gler           ing-Ledger-files-with-TextWrangler
       Visual  Stu-   https://marketplace.visualstudio.com/items?item-
       dio Code       Name=mark-hansen.hledger-vscode



REPORTING BUGS
       Report bugs at http://bugs.hledger.org (or on the #hledger IRC  channel
       or hledger mail list)


AUTHORS
       Simon Michael <simon@joyful.com> and contributors


COPYRIGHT
       Copyright (C) 2007-2016 Simon Michael.
       Released under GNU GPL v3 or later.


SEE ALSO
       hledger(1),      hledger-ui(1),     hledger-web(1),     hledger-api(1),
       hledger_csv(5), hledger_journal(5), hledger_timeclock(5), hledger_time-
       dot(5), ledger(1)

       http://hledger.org



hledger 1.9.99                    March 2018                hledger_journal(5)
