D directives are now fully equivalent to commodity directives for
setting a commodity's display style. (Previously it was equivalent to
a posting amount, so it couldn't limit the number of decimal places.)
When both kinds of directive exist, commodity directives take precedence.
When there are multiple D directives in the journal, only the last one
affects display style.
Stop exporting journalAmounts, overJournalAmounts, traverseJournalAmounts.
Rename journalAmounts helper to journalStyleInfluencingAmounts.
D directives are now a little better at influencing amount
canonicalisation, eg in the updated test case.
Hledger.Util.Tests helpers have been cleaned up, and test names are
now shown.
Tests have been cleaned up a bit. Some groups of unnamed tests have
been collapsed into a single named test containing a sequence of
assertions. The test command counts named tests, not assertions, so
the reported unit test count has dropped from 199 to 188.
easytest is not actively maintained and requires an old version of
hedgehog which does not support base-compat 0.11 & ghc 8.8.
This is still using the old easytest helpers, and not displaying test
names properly.
Certain journal entries could trigger a bug where we displayed amounts
with the same character for digit group mark and decimal mark. Now if
a comma or period digit group mark is detected, that forces the
decimal mark to be the other character.
And if they did, the stats command would now throw an error.
Changed:
journalApplyCommodityStyles
journalInferCommodityStyles
commodityStylesFromAmounts
dropped journalPrices
renamed Price to AmountPrice, AKA "transaction price"
renamed MarketPrice to PriceDirective.
added new MarketPrice (more pure form of PriceDirective without the amount style information)
Prices is now a more efficient data structure, but not used yet.
This feature turns out to be quite involved, as valuation interacts
with the many report variations. Various bugs/specs have been
fixed/clarified relating to register's running total, balance totals
etc. Eg register's total should now be the sum of the posting amount
values, not the values of the original sums. Current level of support
has been documented.
When valuing at transaction date, we once again do early valuation of
all posting amounts, to get more correct results. variants. This means
--value-at=t can be slower than other valuation modes when there are
many transactions and many prices. This could be revisited for
optimisation when things are more settled.
-V is still quite a bit slower than no -V, but not as much as before:
+===========================================================++=======+
| hledger.999.pre -f examples/10000x10000x10.journal bal || 5.20 |
| hledger.999.pre -f examples/10000x10000x10.journal bal -V || 57.20 |
| hledger.999 -f examples/10000x10000x10.journal bal || 5.34 |
| hledger.999 -f examples/10000x10000x10.journal bal -V || 17.50 |
+-----------------------------------------------------------++-------+
I needed to be more careful about ordering, as johannesgerer's original
code was, and the tests missed it. I think I have it now.
Found the PR whose code I have been reworking, it was #438.
Going with option 1b from the issue: calculated and asserted amounts
are compared exactly, disregarding display precision.
But now balance assertion failure messages show those exact amounts at
full precision, avoiding confusion.
Surprisingly, balance assertions were checking to maximum precision,
which meant it was possible, with a display-precision-limiting
commodity directive, to have a failing assertion with the error
message showing asserted and actual amounts that looked the same.
Now we round the calculated account balance (but not the asserted
balance) to display precision before comparing. This should ensure
assertions always behave as you would expect from visual inspection.
This should eventually include accountnames from transaction
modifiers (if `--auto` is enabled), or periodic transactions (if
`--forecast` is enabled).
* journal: Get rid of `journalFinalise` and use granular functions
Complete the process started in 53b3e2bd. This gets rid of the
`journalFinalise` function and uses the smaller steps, in order to
have more granular control.
* journal: Change order of operations in finalization
We want to make sure that we add the filepath after the order is
reversed, so the added filepath is on the head and not the tail (as it
would be if it were reversed after it was added).
* journal: Refine granular finalization functions
This commit fixes two of the granular finalization functions:
1. Rename `journalSetTime` to `journalSetLastReadTime` and improve
documentation.
2. Remove `journalSetFilePath`. It's redundant with `journalAddFile`
currently in `Hledger.Read.Common`. The only difference between the
functions is where the file is added (we keep the one in which it
is added to the tail), so we change the position vis-a-vis
reversal.
`journalFinalise` is only used in the `parseAndFinaliseJournal`
functions, but it needs to be run differently at different stages when
transaction modifiers are applied. This change breaks it into smaller
functions, and uses those smaller parts in `parseAndFinaliseJournal`
as needed.
Currently `journalFinalise` always reverses the order of
entries. However, if there are automated transactions, we might need
to run it twice. This adds a boolean flag to make reordering
optional. This will be used in the `parseAndFinaliseJournal`
functions.
These commands now detect the account types declared by account directives.
Whenever such declarations are not present, built-in regular expressions
are used, as before.
Previously you had to use one of the standard english account names
(assets, liabilities..) for top-level accounts, if you wanted to use
the bs/bse/cf/is commands.
Now, account directives can specify which of the big five categories
an account belongs to - asset, liability, equity, revenue or expense -
by writing one of the letters A, L, E, R or X two or more spaces after
the account name (where the numeric account code used to be).
This might change. Some thoughts influencing the current syntax:
- easy to type and read
- does not require multiple lines
- does not depend on any particular account numbering scheme
- allows more types later if needed
- still anglocentric, but only a little
- could be treated as syntactic sugar for account tags later
- seems to be compatible with (ignored by) current Ledger
The current design permits unlimited account type declarations anywhere
in the account tree. So you could declare a liability account somewhere
under assets, and maybe a revenue account under that, and another asset
account even further down. In such cases you start to see oddities like
accounts appearing in multiple places in a tree-mode report. In theory
the reports will still behave reasonably, but this has not been tested
too hard. In any case this is clearly too much freedom. I have left it
this way, for now, in case it helps with:
- modelling contra accounts ?
- multiple files. I suspect the extra expressiveness may come in handy
when combining multiple files with account type declarations,
rewriting account names, apply parent accounts etc.
If we only allowed type declarations on top-level accounts, or
only allowed a single account of each type, complications seem likely.
- In anticipation of megaparsec 7, which removes support for stacks of
include files (as far as I can tell)
- Intended for the 'StateT Journal' layer of the parser
- A stack of include files would be better in a 'ReaderT' layer, but I
don't want to add another layer to the parser
- Intended for detecting cycles of include files
- Potential issue: for proper error messages for include file cycles,
we must remember to provide the filepath of the root journal file via
the initial journal state passed to a 'JournalParser'; I imagine
that we may forget to do so because in all other cases it is okay
not to do so.
A bunch of account sorting changes that got intermingled.
First, account codes have been dropped. They can still be parsed and
will be ignored, for now. I don't know if anyone used them.
Instead, account display order is now controlled by the order of account
directives, if any. From the mail list:
I'd like to drop account codes, introduced in hledger 1.9 to control
the display order of accounts. In my experience,
- they are tedious to maintain
- they duplicate/compete with the natural tendency to arrange account
directives to match your mental chart of accounts
- they duplicate/compete with the tree structure created by account
names
and it gets worse if you think about using them more extensively,
eg to classify accounts by type.
Instead, I plan to just let the position (parse order) of account
directives determine the display order of those declared accounts.
Undeclared accounts will be displayed after declared accounts,
sorted alphabetically as usual.
Second, the various account sorting modes have been implemented more
widely and more correctly. All sorting modes (alphabetically, by account
declaration, by amount) should now work correctly in almost all commands
and modes (non-tabular and tabular balance reports, tree and flat modes,
the accounts command). Sorting bugs have been fixed, eg #875.
Only the budget report (balance --budget) does not yet support sorting.
Comprehensive functional tests for sorting in the accounts and balance
commands have been added. If you are confused by some sorting behaviour,
studying these tests is recommended, as sorting gets tricky.
This makes skipping/unskipping tests easier, and improves readability
a bit.
Note it's also possible to just write the test name with no preceding
function, when the type is constrained (see Journal.hs).
A commodity directive that doesn't specify the decimal point character
increases ambiguity and the chance of misparsing numbers, especially
as it overrides all style information inferred from the journal amounts.
In some cases it caused amounts with a decimal point to be parsed as if
with a digit group separator so 1.234 became 1234.
We could augment it with extra info from the journal amounts, when available,
but it would still be possible to be ambiguous, and that won't be obvious.
A commodity directive is what we recommend to nail down the style.
It seems the simple and really only way to do this reliably is to require
an explicit decimal point character. Most folks probably do this already.
Unfortunately, it makes another potential incompatiblity with ledger and
beancount journals. But the error message will be clear and easy to
work around.
Inferred amounts now have the appropriate standard amount style applied.
And when checking for balanced transactions, amount styles declared with
commodity directives are also used (previously only inferred amount styles were).
Now we have:
-- | Sorted unique account names posted to by this journal's transactions.
journalAccountNamesUsed :: Journal -> [AccountName]
-- | Sorted unique account names implied by this journal's transactions -
-- accounts posted to and all their implied parent accounts.
journalAccountNamesImplied :: Journal -> [AccountName]
-- | Sorted unique account names declared by account directives in this journal.
journalAccountNamesDeclared :: Journal -> [AccountName]
-- | Sorted unique account names declared by account directives or posted to
-- by transactions in this journal.
journalAccountNamesDeclaredOrUsed :: Journal -> [AccountName]
-- | Sorted unique account names declared by account directives, or posted to
-- or implied as parents by transactions in this journal.
journalAccountNamesDeclaredOrImplied :: Journal -> [AccountName]
-- | Convenience/compatibility alias for journalAccountNamesImpliedOrUsed.
journalAccountNames :: Journal -> [AccountName]
